Overview
Fincor 2610 Series 0.125 hp to 5 hp
115-230 Volts
Full Feature Non-Regenerative DC
Drives
Overview
Fincor 2610 Series drives feature a fully isolated regulator
using surface mount technology. It includes additional inputs and
outputs with advanced control capabilities.
Key Features
- 1/8 to 5 hp (115 – 230 VAC)
- Fully Isolated Regulator
- Speed or Torque Control
- 0 – 10 VDC or 4 – 20 mA input signal
- PID / Speed Trim Control Input
- Monitoring Output (0 – 10 VDC or 4 – 20 mA)
- Line Start /Auto Restart Enable/Disable
- Dual Field Supply
- DC-Tachometer Input
Non-Regenerative Drives
Non-regenerative drives are typically used on applications which
primarily motor in one direction and stopping is achieved through
friction or infrequent use of a dynamic braking resistor. These
drives may provide speed or torque control from a potentiometer or
unidirectional (0-10 VDC or 4-20 mA) control signal. Reversing
requires a switch or contact closure to initiate the change. Upon
the reversing signal, the drive will allow the motor to coast to a
stop (or perform a control stop under a decel ramp with control
stop option) or utilize a dynamic braking resistor to pull it to a
stop before switching the motor leads with a contactor and starting
the motor in the opposite direction.